Browse & Explore

Search & Select

LLDPE

Description

General

Typical thickness of thin film is 25 um. LLDPE is not or difficult to bond with an adhesive. Bonding is only possible with cyano-acrylaat after the application of a primer. With cyano-acrylaat it is not possible to bond with glass, stone and concrete.

Properties

Chemical properties

Minimum value Maximum value Unit Sources
%
0.01 0.01 % Idemat 2003

Electrical properties

Minimum value Maximum value Unit Sources
kV/mm
%
V
Ohm.mm²/m

Manufacturing Properties

Minimum value Maximum value Unit Sources

Mechanical properties

Minimum value Maximum value Unit Sources
MPa
MPa
MPa
911 943 kg/m³ Idemat 2003
500 900 % Idemat 2003
MPa
J/cm
MPa
8 20 MPa Idemat 2003
MPa
20 30 MPa Idemat 2003
250 700 MPa Idemat 2003

Optical properties

Minimum value Maximum value Unit Sources

Thermal properties

Minimum value Maximum value Unit Sources
-125 -70 °C Idemat 2003
122 127 °C Idemat 2003
°C
J/kg.K
W/m.K
e-6/K

Environment

1.82 mPt
0.31 Pt
724 mELU
1.82 MJ/MJ
75.61 MJ
4.11 kg
0.01 kg
Average environmental data for the production of linear low density polyethylene obtained from four plants. The gross energy requirement varies between73 and 104 MJ/kg with an average of 83 MJ/kg.

Tags