UP 45% gl. mat

Category Type Material
Polymers Reinforced Polymers

show all types of Polymers

 ABS GF30
BMC (UP GF15)
PA 6 GF30
PA 66 GF30
PBT GF30
PC GF30
PEEK 30 C
PEEK GF30
PES GF30
PET GF30
POM GF30
PP GF30
PPO GF30
PPS GF40
PSU GF30
SMC (UP GF25)
SMC (UP GF50)
UP 25% gl.mat
UP 45% gl. mat

Data Table for: Polymers: Reinforced Polymers: UP 45% gl. mat

Mechanical Properties

Quantity Value Unit
Young's modulus 9500 - 9500 MPa
Tensile strength 150 - 150 MPa
Compressive strength 180 - 180 MPa
Bending strength 200 - 200 MPa

Physical Properties

Quantity Value Unit
Thermal expansion 22 - 22 e-6/K
Thermal conductivity 0.291 - 0.291 W/m.K
Service temperature -20 - 150 °C
Density 1550 - 1550 kg/m3
Resistivity 1000000000000 - 100000000000000 Ohm.mm2/m
Breakdown potential 20 - 20 kV/mm
Dielectric loss factor 0.006 - 0.006

General

     
Remarks Thermosetting resin is injected in the fibercloth. This can be done in different ways, e.g. vacuum injection and hand lay-up. Most of the time a simple mould or shaped core material is used to lay-up thje glassfibers. Suited for small productionseries 1-1000.

Sample: Reinforced Polymers

Browse & Explore

Material category:

Search & Select

Enter search term(s)

Search

Or choose up to 3 criteria

min:  max:  min:  max:  min:  max: 
Select