SMC (UP GF25)

Category Type Material
Polymers Reinforced Polymers

show all types of Polymers

 ABS GF30
BMC (UP GF15)
PA 6 GF30
PA 66 GF30
PBT GF30
PC GF30
PEEK 30 C
PEEK GF30
PES GF30
PET GF30
POM GF30
PP GF30
PPO GF30
PPS GF40
PSU GF30
SMC (UP GF25)
SMC (UP GF50)
UP 25% gl.mat
UP 45% gl. mat

Data Table for: Polymers: Reinforced Polymers: SMC (UP GF25)

Mechanical Properties

Quantity Value Unit
Young's modulus 8500 - 12500 MPa
Shear modulus 3400 - 5000 MPa
Tensile strength 65 - 80 MPa
Elongation 1 - 1.3 %
Bending strength 150 - 200 MPa
Impact strength 60 - 90 J/cm

Physical Properties

Quantity Value Unit
Thermal expansion 14 - 18 e-6/K
Density 1700 - 2000 kg/m3
Resistivity 1e+20 - 1e+20 Ohm.mm2/m
Shrinkage 0 - 0.05 %

Environmental Data

Quantity Value Unit
Eco indicator 95 4.5 mPt
EPS 549 mELU
Ex (in) / Ex (out) 7.61688311688312 MJ/MJ
Eco indicator 99 0.254 Pt
Environmental remarks Although up to 15% material can be reused, this is normally no practice.

General

     
Remarks SMC is an abreviation for Sheet Molding Compound. This is a material composed of Styrene, Polyester, Glass fibre, a filler and some agents. SMC is delivered as sheet usually 4mm thick and 1500mm wide. It can be stored in a roll or folded prior to application. SMC must be used within weeks or some months depending of the formulation and storage conditions. For first class surface quality the galss content is limited to 30%. Continuous strands and woven rovings are also avoided to optimise surface quality
Sample

Sample: Reinforced Polymers

Browse & Explore

Material category:

Search & Select

Enter search term(s)

Search

Or choose up to 3 criteria

min:  max:  min:  max:  min:  max: 
Select