PP GF30

Category Type Material
Polymers Reinforced Polymers

show all types of Polymers

 ABS GF30
BMC (UP GF15)
PA 6 GF30
PA 66 GF30
PBT GF30
PC GF30
PEEK 30 C
PEEK GF30
PES GF30
PET GF30
POM GF30
PP GF30
PPO GF30
PPS GF40
PSU GF30
SMC (UP GF25)
SMC (UP GF50)
UP 25% gl.mat
UP 45% gl. mat

Data Table for: Polymers: Reinforced Polymers: PP GF30

Mechanical Properties

Quantity Value Unit
Young's modulus 2500 - 5000 MPa
Tensile strength 40 - 70 MPa
Elongation 20 - 50 %
Bending strength 75 - 75 MPa

Physical Properties

Quantity Value Unit
Thermal conductivity 0.22 - 0.22 W/m.K
Melting temperature 160 - 165 °C
Glass temperature -10 - -10 °C
Service temperature -10 - 110 °C
Density 1140 - 1140 kg/m3
Resistivity 1e+20 - 1e+20 Ohm.mm2/m
Breakdown potential 45 - 45 kV/mm
Dielectric loss factor 0.0015 - 0.002
Shrinkage 0.8 - 2 %

Environmental Data

Quantity Value Unit
Eco indicator 95 2.256 mPt
EPS 631.91016 mELU
Ex (in) / Ex (out) 2.84096271826333 MJ/MJ
GER 60.4027 MJ
Raw materials input 4.23261957078527 kg
Solid 0.031379 kg
Eco indicator 99 0.284 Pt
Environmental remarks Average data of 14 European production plants. LCA from extraction to production of PP granules. Feedstock fuels calculated with E-Oil=40MJ/kg, Egas = 38MJ/kg. Data combined with glass fiber production.

General

     
Remarks Good strength and heat-resistance. PP is not or difficult to bond with an adhesive. Bonding is only possible with cyano-acrylaat after the application of a primer. With cyano-acrylaat it is not possible to bond with glass, stone and concrete.

Sample: Reinforced Polymers

Browse & Explore

Material category:

Search & Select

Enter search term(s)

Search

Or choose up to 3 criteria

min:  max:  min:  max:  min:  max: 
Select