| Quantity | Value | Unit |
| Young's modulus | 410 - 750 | MPa |
| Shear modulus | 110 - 350 | MPa |
| Tensile strength | 25 - 36 | MPa |
| Elongation | 350 - 550 | % |
| Compressive strength | 7 - 8 | MPa |
| Bending strength | 5 - 6 | MPa |
| Impact strength | 1.6 - 1.6 | J/cm |
| Quantity | Value | Unit |
| Thermal expansion | 100 - 100 | e-6/K |
| Thermal conductivity | 0.23 - 0.25 | W/m.K |
| Specific heat | 1000 - 1000 | J/kg.K |
| Melting temperature | 327 - 327 | °C |
| Glass temperature | 127 - 127 | °C |
| Service temperature | -200 - 250 | °C |
| Density | 2150 - 2200 | kg/m3 |
| Resistivity | 1e+22 - 1e+22 | Ohm.mm2/m |
| Breakdown potential | 50 - 80 | kV/mm |
| Dielectric loss factor | 0 - 0.0002 | |
| Friction coefficient | 0.05 - 0.08 | |
| Refraction index | 1.35 - 1.35 | |
| Shrinkage | 3.5 - 6 | % |
| Remarks | Better known as Teflon. PTFE is not or difficult to bond with an adhesive. Bonding is only possible with cyano-acrylaat after the application of a primer. With cyano-acrylaat it is not possible to bond with glass, stone and concrete. | |
Sample: Engineering Polymers |
||
![]() |
Dear visitor, Matbase has not changed a lot over the last few years, but, as you may have noticed, read more
Richard Vennix MSc
co-founder of Matbase and innovation consultant
08-12-2009 08:33
Last november was a memorable month for us at Matbase, we passed the milestone of 1000 visitors per day. So I guess we were not that far of when we thought it would be a good idea to make the material database we used as students during our stay at the Delft University of Technology accessable to other people. Apparently, people appreciate the easy way they can lookup the material properties and how we present the data.
Read more »