PP (cop.)

Category Type Material
Polymers Commodity Polymers

show all types of Polymers

 ABS Galvano
ABS General Purpose
ABS Heat Resistant
ABS High Impact
HDPE
LDPE
LLDPE
PMMA
PMMA (cast)
PP (cop.)
PP (hom.)
PS (gpps)
PS (hips)
PVC hard
PVC soft

Data Table for: Polymers: Commodity Polymers: PP (cop.)

Mechanical Properties

Quantity Value Unit
Young's modulus 1100 - 1550 MPa
Shear modulus 300 - 500 MPa
Tensile strength 30 - 38 MPa
Elongation 200 - 700 %
Compressive strength 38 - 55 MPa
Fatigue 24 - 24 MPa
Bending strength 32 - 50 MPa
Impact strength 0.27 - 1.1 J/cm

Physical Properties

Quantity Value Unit
Thermal expansion 58 - 150 e-6/K
Thermal conductivity 0.12 - 0.22 W/m.K
Specific heat 1.927 - 2 J/kg.K
Melting temperature 165 - 165 °C
Glass temperature -10 - -10 °C
Service temperature -10 - 105 °C
Density 902 - 906 kg/m3
Resistivity 1e+21 - 1e+21 Ohm.mm2/m
Breakdown potential 50 - 65 kV/mm
Dielectric loss factor 0.001 - 0.001
Friction coefficient 0.3 - 0.5
Refraction index 1.49 - 1.49
Shrinkage 1 - 2.5 %
Water absorption 0.01 - 0.01 %

Environmental Data

Quantity Value Unit
Eco indicator 95 2.82 mPt
EPS 846 mELU
Ex (in) / Ex (out) 1.77521237203224 MJ/MJ
GER 82 MJ
Raw materials input 4.7773 kg
Solid 0.03103 kg
Eco indicator 99 0.38 Pt
Environmental remarks Average data of 14 European production plants. LCA from extraction to production of PP granules. Feedstock fuels calculated with E-Oil=40MJ/kg, Egas = 38MJ/kg.

General

     
Remarks Price recycled material 0.46 - 0.53 EURO/ kg. PP is not or difficult to bond with an adhesive. Bonding is only possible with cyano-acrylaat after the application of a primer. With cyano-acrylaat it is not possible to bond glass, stone and concrete.

Sample: Commodity Polymers

Browse & Explore

Material category:

Search & Select

Enter search term(s)

Search

Or choose up to 3 criteria

min:  max:  min:  max:  min:  max: 
Select