AlMn1 (DIN 1725-1 wrought aluminium alloy grade)

Category Type Material
Non-ferrous Metals Wrought Aluminium

show all types of Non-ferrous Metals

 Al99,0 (DIN 1712-3 wrought aluminium alloy grade)
Al99,5 (DIN 1712-3 wrought aluminium alloy grade)
Al99,9 (DIN 1712-3 wrought aluminium alloy grade)
AlCu2,6Si0,5Mg0,3 (DIN 1712-3 wrought aluminium alloy grade)
AlCuMg1 (DIN EN 573 - 3 wrought aluminium alloy grade)
AlCuMg2 (2024)
AlCuMgPb (~2011)
AlMg1 (5005)
AlMg3 (~5754A)
AlMg4,5Mn0,4 (5182)
ALMgSi0,5 (6060)
AlMgSi0,7 (6005)
AlMn1 (DIN 1725-1 wrought aluminium alloy grade)
AlMn1,2Mg1 (3004)
AlSi1,1Mg0,6Mn0,4 (6009)
AlZnMgCu1,5 (7075)

Data Table for: Non-ferrous Metals: Wrought Aluminium: AlMn1 (DIN 1725-1 wrought aluminium alloy grade)

Mechanical Properties

Quantity Value Unit
Young's modulus 70000 - 70000 MPa
Shear modulus 27000 - 27000 MPa
Tensile strength 100 - 160 MPa
Elongation 4 - 24 %
Fatigue 50 - 75 MPa
Yield strength 40 - 130 MPa

Physical Properties

Quantity Value Unit
Thermal expansion 23 - 40 e-6/K
Thermal conductivity 198 - 198 W/m.K
Specific heat 960 - 960 J/kg.K
Melting temperature 643 - 655 °C
Density 2730 - 2730 kg/m3
Resistivity 0.03 - 0.04 Ohm.mm2/m
Electrochemical potential -0.74 - -0.71 V

Environmental Data

Quantity Value Unit
Eco indicator 95 55.69 mPt
EPS 2340 mELU
Ex (in) / Ex (out) 5.50795593635251 MJ/MJ
GER 165 MJ
Raw materials input 188.256364200065 kg
Solid 1.99473062 kg
Eco indicator 99 0.73 Pt
Environmental remarks Bauxite winning locations ² Australia 37%, New Guinea 16%, Jamaica 9% en Brasil. Production countries are US 24%, CIS 13%, Canada 9% en Australia. The bauxite winning happens for 95% in surface winning, with draglines and trucks. Aluminium content of bauxite is 17 - 25% . In the Netherlands the average percentage use of scrap in the melt at the primairy smelters is 12%. To evalute the environmental impact associated with the application of aluminium, the total lifecycle should be regarded. The percentage recycled material is strongly dependent of the application. It ranges from almost 2% for packaging to 90% for solid profiles. In the Netherlands the average is 45%.

General

     
Synonyms AlMn1 (DIN 1725-1 wrought aluminium alloy grade),
3.0515.08 (DIN 1725-1 material number),
IADS 3003 aluminium alloy grade,
Wrought aluminium
Remarks Composition of AlMn1 (DIN 1725-1 wrought aluminium alloy grade) in weight %: Aluminium (Al) and 1.0% Manganese (Mn).

Sample: Wrought Aluminium

Browse & Explore

Material category:

Search & Select

Enter search term(s)

Search

Or choose up to 3 criteria

min:  max:  min:  max:  min:  max: 
Select