Browse & Explore

Search & Select

PP GF30

Description

General

Good strength and heat-resistance. PP is not or difficult to bond with an adhesive. Bonding is only possible with cyano-acrylaat after the application of a primer. With cyano-acrylaat it is not possible to bond with glass, stone and concrete.

Properties

Chemical properties

Minimum value Maximum value Unit Sources
0.8 2 % Idemat 2003
%

Electrical properties

Minimum value Maximum value Unit Sources
45 45 kV/mm Idemat 2003
%
V
1.00E+020 1.00E+020 Ohm.mm²/m Idemat 2003

Manufacturing Properties

Minimum value Maximum value Unit Sources

Mechanical properties

Minimum value Maximum value Unit Sources
75 75 MPa Idemat 2003
MPa
MPa
1140 1140 kg/m³ Idemat 2003
20 50 % Idemat 2003
MPa
J/cm
MPa
40 70 MPa Idemat 2003
MPa
MPa
2500 5000 MPa Idemat 2003

Optical properties

Minimum value Maximum value Unit Sources

Thermal properties

Minimum value Maximum value Unit Sources
-10 -10 °C Idemat 2003
160 165 °C Idemat 2003
-10 110 °C Idemat 2003
J/kg.K
0.22 0.22 W/m.K Idemat 2003
e-6/K

Environment

2.26 mPt
0.28 Pt
631.91 mELU
2.84 MJ/MJ
60.4 MJ
4.23 kg
0.03 kg
Average data of 14 European production plants. LCA from extraction to production of PP granules. Feedstock fuels calculated with E-Oil=40MJ/kg, Egas = 38MJ/kg. Data combined with glass fiber production.

Tags

© 2004 - 2016 Matbase |Disclaimer